Old Air Products
50-2551A - POA Update Kit | GM and Ford Applications, with 134aPOA Update Kit for GM & Ford Applications w/ 134A, to Convert to Cycling Clutch System
This POA Update Kit is designed for use with 134a refrigerant. Fits many GM and Ford applications. POA Update Kit replaces the original POA Valve to convert the A/C system to cycling clutch system as found on later model vehicle to eliminate problems with sticking internal piston. This kit includes: Pressure Switch, Wire Harness and fitting to replace POA valve with ports for oil bleed line ...
Old Air Products
50-2500P - STV Update Kit | Convert to Cycling Clutch SystemSTV Update Kit, to Convert Your Suction Throttling Valve to a Cycling Clutch Type System
Old Air Products STV Update Kit The STV Valve Update Kit converts the original STV (Suction Throttling Valve) to a cycling clutch type system. Easy to install by removing the internal parts from original valve and installing update kit into original valve. When updated, the valve retains it's original appearance and works as needed for newer refrigerants. The STV Update Kit includes all ...
Old Air Products
25-0057 - Expansion Valve | 1963-1972 GM models, with Straight Sensor Bulb1963-1972 GM models, w/ Factory A/C, w/ Straight Sensor Bulb
Replacement Expansion Valve for 1963-1972 GM models, with Factory A/C, with Straight Sensor Bulb Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...
Old Air Products
25-8798 - Expansion Valve | Ford Pickup, Straight Flare, Externally Equalized1968-1972 Ford Pickup models, Straight Flare, Externally Equalized
Replacement Expansion Valve for 1968-1972 Ford F-100, F-250, F-350 models, Straight Flare, Externally Equalized Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in the ...
Old Air Products
25-4604 - Heater Valve | 1964-1987 GM and Ford, Vacuum1964-1987 GM and Ford models, w/ Factory A/C, Excluding ATC, w/o Bracket, Vacuum
Replacement Heater Valve for 1964-1987 GM and Ford models with Factory A/C, Excluding ATC, without Bracket, Vacuum Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...
Old Air Products
25-8803 - Expansion Valve | Ford, Lincoln, and Mercury, 90 Deg., Internally Equalized1966-1968 Ford, Lincoln, and Mercury models, 90 Degree Flare, Internally Equalized
Replacement Expansion Valve for 1966-1968 Ford, Lincoln, and Mercury models, 90 Degree Flare, Internally Equalized Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components ...
Old Air Products
25-4623 - Heater Valve | Dodge, Ford, and Pontiac, Vacuum, Normally ClosedDodge, Ford, Lincoln, and Pontiac models, w/ Factory A/C, Normally Closed, Threaded, Vacuum Operated
Replacement Heater Valve for Dodge, Ford, Lincoln, and Pontiac models, with Factory A/C, Threaded, Vacuum Operated, Normally Closed Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...
Old Air Products
25-4665 - Heater Valve | 1966-1967 Dodge, with Thermostatic Valve1966-1967 Dodge models, w/ Factory A/C, Rebuilt Thermostatic Valve, Requires Core
Replacement Heater Valve for 1966-1967 Dodge models with Factory A/C, Rebuilt Thermostatic Valve, Requires Core For Core refund. Only valves with copper heater fittings are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If ...
Old Air Products
25-8701 - Expansion Valve | Ford and Mercury, Straight Flare, with Quick Disconnect1965-1968 Ford and Mercury models, Straight Flare, with Quick Disconnect
Replacement Expansion Valve for 1965-1968 Ford and Mercury models, Straight Flare, with Quick Disconnect Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in the ...
Old Air Products
25-0055 - Expansion Valve | 1963-1965 Buick Riviera, Rear Evaporator Valve1963-1965 Buick Riviera models, w/ Fixed Equalizer, Rear Evaporator Valve
Replacement Expansion Valve for 1963-1965 Buick Riviera models, with Fixed Equalizer, Rear Evaporator Valve Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components ...
Old Air Products
25-4455 - Heater Valve | 1958-1964 Oldsmobile, Threaded, Vacuum Operated1958-1964 Oldsmobile models, Threaded, Vacuum Operated
Replacement Heater Valve for 1958-1964 Oldsmobile models, Threaded, Vacuum Operated Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in the ...
Remanufactured VIR Assembly. NOTE: Core charge required for purchase. Core must be rebuildable for refund. ...
Old Air Products
50-2552A - POA Update Kit | GM and Ford Applications, with 134aPOA Update Kit for GM & Ford Applications w/ 134A, to Convert to Cycling Clutch System
This POA Update Kit is designed for use with 134a refrigerant. Fits many GM and Ford applications. POA Update Kit replaces the original POA Valve to convert the A/C system to cycling clutch system as found on later model vehicles to eliminate problems with sticking internal piston. This kit includes: Pressure Switch, Wire Harness and fitting to replace POA valve with ports for oil bleed line ...
Old Air Products
50-2551 - POA Update Kit | GM and Ford Applications, with R12POA Update Kit for GM & Ford Applications w/ R-12, to Convert to Cycling Clutch System
This POA Update Kit is designed for use with R-12 refrigerant. Fits many GM and Ford applications. Before 4/15/73 POA Update Kit replaces the original POA Valve to convert the A/C system to a cycling clutch system as found on later model vehicles to eliminate problems with sticking internal piston. This kit includes: Pressure Switch, Wire Harness and fitting to replace POA valve with ports ...
Old Air Products
50-2510 - Rebuild Kit | 1957-1961 GM, Hot Gas Bypass Valve1957-1961 GM models w/ Factory A/C, Hot Gas Bypass Valve Rebuild Kit
Hot Gas Bypass Valves were used on 1958-1961 GM vehicles with factory air conditioning This kit is designed to work with both vacuum and cable operated bypass valves. Includes illustrated instructions for both assembly and adjustment, internal diaphragms and all necessary o-rings. Made in the ...
Old Air Products
50-2559A - POA Update Kit | Lincoln and Mercury Applications, with 134aPOA Update Kit for Ford Applications w/ #12 Inlet Fitting and #10 Outlet Fitting, for 134A
This POA Update Kit is designed for use with 134a refrigerant. Fits Ford applications with #12 fitting on inlet and #10 fitting on the outlet of the original POA Valve and internally equalized expansion valve. POA Update Kit replaces the original POA Valve to convert the A/C system to cycling clutch system as found on later model vehicles to eliminate problems with sticking internal piston. ...
Old Air Products
50-3601 - VIR Maintenance Kit | 1974-1976 GM Applications1974-1976 GM models, VIR Maintenance Rebuild Kit
Our VIR Maintenance Rebuild Kit designed for 1974-1976 GM models This maintance kit has all the required parts to rebuild your VIR assembly back to proper working condition. This kit includes pickup screen, desiccant bag, and all necessary o-rings. NOTE: The internal POA and expansion valves must be functioning properly for instalation of this kit to be successful. Made in the ...
Old Air Products
50-0085 - POA Combo Kit | POA Update, 2nd Series GM Drier, TXV, Tacky Tape, and O-RingsPOA Update Kit, 2nd Series GM Drier, Expansion Valve, Tacky Insulating Tape, and O-Rings
Complete POA Combo Kit This unique POA Valve Combo Kit is designed to include the most common parts used when servicing your A/C System. This kit includes our patented POA Valve Update Kit to eliminate problems with the sticking piston inside the original valve, and convert to a cycling clutch system as found on later model vehicles. The aluminum receiver/drier and expansion valve are ...
Old Air Products
25-4410 - Heater Valve | 1959-1961 Buick and Pontiac, with Thermostatic Valve1959-1961 Buick and Pontiac models, w/ Thermostatic Valve, Bolt-On, Requires Core
Replacement for 1959-1961 Buick and Pontiac models excluding Tempest, with Thermostatic Valve, Bolt-On, Requires Core For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being ...
Old Air Products
50-2503 - STV Eliminator Kit | 1962-1965 Cadillac models1962-1965 Cadillac models, STV Eliminator Kit, w/ two #12 Fittings, US Patent # 5,918,476
Our STV Eliminator Kit designed for 1962-1965 Cadillac models with two #12 Fittings The STV Eliminator replaces the STV Valve and converts the A/C System to a cycling clutch type system like found on later model vehicles. An excellent choice for vehicles being retrofitted with newer automotive refrigerants. The STV Eliminator Kit includes: Thermostat, Wire Harness, Clamp, Tacky Tape, and ...
Old Air Products
50-0082 - POA Combo Kit | POA Update, 2nd Series GM Drier, TXV, Tacky Tape, and O-RingsPOA Update Kit, 2nd Series GM Drier, Expansion Valve, Tacky Insulating Tape, and O-Rings
Complete POA Combo Kit This unique POA Valve Combo Kit is designed to include the most common parts used when servicing your A/C System. This kit includes our patented POA Valve Update Kit to eliminate problems with the sticking piston inside the original valve, and convert to a cycling clutch system as found on later model vehicles. The aluminum receiver/drier and expansion valve are ...
Old Air Products
25-4610 - Heater Valve | 1969-1978 GM models with A/C, Vacuum1969-1978 GM models, w/ Factory A/C, Normally Open w/ Bracket, Vacuum
Replacement Heater Valve for 1969-1978 GM models with Factory A/C, Normally Open with Bracket, Vacuum Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in ...
Old Air Products
25-8705 - Expansion Valve | Ford and Lincoln, Underdash, Reverse Flow1964-1966 Ford and Lincoln models, Underdash, Flare, Reverse Flow
Replacement Expansion Valve for 1964-1966 Ford and Lincoln models, Underdash, Flare, Reverse Flow Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in the ...
Old Air Products
25-4404 - Heater Valve | 1954-1955 Buick, with Thermostatic ValveRebuild 1954-1955 Buick Full Size models, w/ Thermostatic Valve, Requires Core
THIS IS A REBUILD OF ORIGINAL HEATER VALVE SENT IN. $100.00 CORE CHARGE INCLUDED IN PRICE (Picture is for illustration purposes only). Replacement Heater Valve for 1954-1955 Buick Full Size models with Thermostatic Valve For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or ...
Old Air Products
25-4657 - Heater Valve | 1964-1970 Cadillac, Vacuum Operated with 3 Ports1964-1970 Cadillac models, Vacuum Operated with 3 Ports
Replacement Heater Valve for 1964-1970 Cadillac models, Vacuum Operated with 3 Ports Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in the ...
Old Air Products
50-2552 - POA Update Kit | GM and Ford Applications, with R12POA Update Kit for GM & Ford Applications w/ R-12, to Convert to Cycling Clutch System
This POA Update Kit is designed for use with R-12 refrigerant. Fits many GM and Ford applications. POA Update Kit replaces the original POA Valve to convert the A/C system to a cycling clutch system as found on later model vehicles to eliminate problems with sticking internal piston. This kit includes: Pressure Switch, Wire Harness and fitting to replace POA valve with ports for oil bleed line ...
Old Air Products
25-0515 - Diaphragm | 1962-1965 GM models, with STV1962-1965 GM models, STV Diaphragm
Replacement Diaphragm for 1962-1965 GM models, with STV Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...
Old Air Products
25-0060 - Expansion Valve | 1958-1967 GM models, with No Equalizer1958-1967 GM models, w/ Factory A/C, w/ No Equalizer
Replacement Expansion Valve for 1958-1967 GM models with Factory A/C, with No Equalizer Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in the ...
Old Air Products
25-4440 - Heater Valve | 1959-1962 Chevy Full Size, with Thermostatic Valve1959-1962 Chevrolet Full Size models, w/ Thermostatic Valve, Bolt-On, Requires Core
Replacement Heater Valve for 1959-1962 Chevrolet Full Size models with Thermostatic Valve, Bolt-On, Requires Core For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned ...