The 800 Series AC System is recommended for use in smaller vehicles. This unit features a 32 pass aluminum coil and 4 outlets along the front of the case to connect 2" Duct hose for the dash louvers. Includes: rotary blower switch, thermostat and choice of 4 louvers. Complete System ...

Old Air Products 800 Series complete A/C & Heat System with Electronic Heater Valve The 800 Series AC & Heater System is recommended for use in smaller vehicles with a limited amount of space inside the dash. This unit features a 32 pass aluminum coil and 4 outlets along the front ...

Universal Use Condenser Inlet, #8 Discharge Line Excellent for routing custom A/C lines to the opposite side of the vehicle. Perfect for use with driver's side compressor mounts. Made in the ...

135 Degree Female O-ring Fitting w/ 134a Service Port for Braided Stainless A/C ...

135 Degree Female O-ring Fitting w/ 134a Service Port for Braided Stainless A/C ...

135 Degree Female O-ring Fitting for Braided Stainless A/C ...

Custom SuperKool Condenser and Electric Fan Assembly for 1947-55 Chevrolet Trucks, Passenger Side Compressor SuperKool aluminum condenser with 14" electric fan and mounting kit provides increased airflow across condenser and radiator for maximum cooling system performance. Condenser and Electri

Custom SuperKool Condenser and Electric Fan Assembly for 1947-55 Chevrolet Trucks, Driver Side Compressor SuperKool aluminum condenser with 14" electric fan and mounting kit provides increased airflow across condenser and radiator for maximum cooling system performance. Condenser and El

A/C Liquid Line - #95-0479 1967 Oldsmobile Cutlass Replacement A/C liquid line designed for 1967 Oldsmobile Cutlass models. Connects the condenser to the evaporator liquid line for proper refrigerant flow through the A/C system. Old Air Products hose assemblies are

A/C Discharge Hose Assembly - #95-0481 1967 Oldsmobile Cutlass Replacement A/C discharge hose assembly designed for 1967 Oldsmobile Cutlass models. Connects the compressor to the condenser for proper refrigerant flow through the A/C system. Old Air Products h

Features Set of 4 Mounting Studs with bushings with nuts to mount the condenser to core support Made in the USA !!!

1 Condenser Mounting Stud with nuts to mount the condenser to core support Made in the USA !!!

Custom SuperKool Condenser Assembly Kit for 1967-72 Chevrolet and GMC Trucks New design features our aluminum Superflow condenser with custom tubes and mounting brackets. Can be used with aftermarket A/C systems or as a replacement for the original factory condenser assembly. Su

Custom SuperKool Condenser assembly for 1981-87 Chevrolet & GMC Trucks. This customcondenser assembly is specifically designed for trucks using the original OEM factory A/C syste

SuperKool Remote Parallel Flow Aluminum Condenser with Shroud and 11" Electric Fan Dimensions:  12" tall x 23" wide x 4" overall (Including fan & Shroud) Note: Remote condenser assembly is not designed for use in front of the radiator. Excellent for vehicles with litt

Factory Replacement Condenser for 1968 Chevrolet Corvette models with Factory A/C Our Factory Replacement Condensers are designed to fit, look, and function the same or better than factory units, with correct bracketing to insure an exact fit.  May be drop shipped from vendor. Made ...

Factory Replacement Condenser for 1963-1965 Chevrolet Corvette models with Factory A/C Our Factory Replacement Condensers are designed to fit, look, and function the same or better than factory units, with correct bracketing to insure an exact fit. May be drop shipped ...

Our direct replacement A/C Condenser Tube Set for 1975-80 Chevrolet & Trucks, (2Pcs) As one of the most common wear items, A/C lines are one of the first components to develop a leak. Restore your A/C performance with this new Tube Set! Made in the ...

Custom SuperKool Condenser assembly for 1973-80 Chevrolet & GMC Trucks. This customcondenser assembly is specifically designed for trucks using the original OEM factory A/C syste

...

Custom SuperKool Condenser Assembly for 1967-72 Ford Trucks, Compressor on Drivers Side   Condenser and drier assembly mounts to the front of the radiator with custom aluminum tubes that pass neatly through the core support. Kit includes condenser, mounting brack

Custom SuperKool Condenser Assembly for 1973-79 Ford Trucks with Compressor on Driver Side   Condenser and drier assembly mounts to the front of the radiator. Custom aluminum tubes connect to receiver drier and pass neatly through the core support with rubber ...

Custom SuperKool Condenser Assembly for 1981-87 Chevrolet and GMC Trucks with Compressor on Passenger Side Note : These Condensers can be used with the original factory a/c system components but will require custom a/c hose assemblies to complete the installation. These ...

Factory Replacement Condenser for 1966-1967 Chevrolet Corvette models w/Factory A/C.   Circuited for High Performance w/134a & R12 Our Factory Replacement Condensers are designed to fit, look, and function the same or better than factory units, with correct bracketing to insure an ...

Factory Replacement Condenser for 1968-1972 Chevrolet Corvette models with Factory A/C.  Circuited for High Performance w/134a & R12 Our Factory Replacement Condensers are designed to fit, look, and function the same or better than factory units, with correct bracketing to insure ...

Factory Replacement Condenser for 1967-1970 Ford models, with Factory A/C Our Factory Replacement Condensers are designed to fit, look, and function the same or better than factory units, with correct bracketing to insure an exact fit. May be drop shipped from vendor. Note: Photo is ...

Factory Replacement A/C Jumper Tube for 1966-1967 Pontiac GTO, Lemans, and Tempest models Drier to Condenser Jumper Line. Made in the ...

Tube Kit - with Bottom Fittings for use with #11-2015 SuperKool Condenser Custom aluminum tubes  place fittings at bottom of condenser. Candenser assembly can be installed for fittings to point towards either driver or passenger side of vehicle. Dimensions for 11-2015 with Tube Kit: 22" ta

Tube Kit with side fittings for #11-2015 SuperKool Condenser Custom aluminum tube set places fittings on passenger side of vehicle.  Dimensions: #11-2015 with Tube Kit installed 20" tall x 16.5" wide x 1" thick Picture is for illustration only, does not come ...

Fresh Air Vacuum Actuator for 1973-82 Chevrolet Trucks Replaces GM# 1996500 The Vacuum Actuator is used to open and close the various air distribution blend doors throughout the A/C and Heat System. Restore and maintain proper functioning of your A/C, Heat and Defrost System with our high ...

Our direct replacement A/C Condenser Tube Set for 1973-74 Chevrolet & Trucks, (3 Pcs) As one of the most common wear items, A/C lines are one of the first components to develop a leak. Restore your A/C performance with this new Tube Set! Made in the ...

A/C Condenser Tube Set for 1975-80 Chevrolet & Trucks, (2Pcs) As one of the most common wear items, A/C lines are one of the first components to develop a leak. Restore your A/C performance with this new Tube Set! Made in the ...

Custom SuperKool Condenser Assembly for 1970-73 Ford Mustang SuperKool condenser assembly includes receiver/drier, mounting brackets and necessary hardware. Features factory style appearance with updated aluminum condenser and o-ring fittings for use with Old Air Products Hurricane

...

Custom SuperKool Condenser Assembly for 1953-56 Ford Trucks with Compressor on Driver Side   Condenser and drier assembly mounts to the front of the radiator. Custom aluminum tubes connect to receiver drier and pass neatly through the core support with rubber ...

Custom SuperKool Condenser Assembly for 1973-79 Ford Trucks with Compressor on Passenger Side   Condenser and drier assembly mounts to the front of the radiator. Custom aluminum tubes connect to receiver drier and pass neatly through the core support with ...

Custom SuperKool Condenser Assembly for 1973-80 Chevrolet and GMC Trucks with Compressor on Driver Side   Note : These Condensers can be used with the original factory a/c system components but will require custom a/c hose assemblies to complete the installation. These ...

Custom SuperKool Condenser Assembly for 1973-80 Chevrolet and GMC Trucks with Compressor on Passenger Side   Note : These Condensers can be used with the original factory a/c system components but will require custom a/c hose assemblies to complete the installation. These ...

Custom SuperKool Condenser Assembly for 1981-87 Chevrolet and GMC Trucks with Compressor on Driver's side Note : These Condensers can be used with the original factory a/c system components but will require custom a/c hose assemblies to complete the installation. These ...

A/C Hose Liquid Line for 1971-1972 Chevrolet Nova models, Condenser to Drier Inlet Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a refrigerant. Made in ...

A/C Hose Liquid Line for 1969-1970 Chevrolet Chevy II and Nova models, with V8, Condenser to Drier Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a ...

A/C Hose Liquid Line for 1976 Chevrolet Chevelle and El Camino models, VIR to Condenser Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a refrigerant. ...

A/C Hose Liquid Line for 1969 Chevrolet Camaro models, Condenser to Drier, Long Tube Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a refrigerant. Made in the ...

A/C Hose Assembly for 1970-1973 Pontiac Firebird models, Condenser to Drier Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a refrigerant. Made in the ...

A/C Hose Assembly for 1976-1977 Chevrolet Chevelle and El Camino, Orifice Tube to Condenser Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a ...

A/C Hose Assembly for 1973 Pontiac Firebird models, Condenser to Drier Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a refrigerant. Made in the ...

A/C Hose Assembly for 1966 Oldsmobile Full Size models, Compressor to Condenser, Discharge Line Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a ...

A/C Hose Liquid Line for 1970-1973 Chevrolet Camaro models, Condenser to Drier Replaces GM# 3967921 & 3998429 Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either ...

A/C Hose Assembly for 1959-1960 Cadillac models, Early 1960, Hot Gas Valve to Condenser, Discharge Line Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or ...

A/C Discharge Hose Assembly, Hot Gas Bypass Valve to Condenser, for 1960 Cadillac models with Hot Gas Bypass Valve mounted on inner fender. Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are ...