Our VIR Eliminator kit converts the A/C system on most 1974-1976 GM vehicles to a cycling clutch system as found on later model vehicles. The original VIR assembly is replaced with an accumulator and orifice. This conversion eliminates common problems with sticking POA ...

Sanden 508 Style Compressor for 134a, with Vertical O-Ring and 2 Groove V-Belt Clutch. Available in plain, polished or chrome finish. Sanden style compressors are the most popular and best suited for most street vehicles, even with larger interiors. Designed to bolt in ...

Sanden 7H15 Heavy Duty Compressor for 134a, with Vertical O-Ring and 2 Groove V-Belt Clutch. Available in plain or polished finishes. Sanden style compressors are the most popular and best suited for most street vehicles, even with larger interiors. Designed to ...

New Check Valve replacement for AC vacuum systems, 5/32" x 5/32" Made in the ...

Factory Replacement Condenser for 1983-1987 Chevrolet Pickup models Our Factory Replacement Condensers are designed to fit, look, and function the same or better than factory units, with correct bracketing to insure an exact fit.  May be drop shipped ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Replacement for 1959-1961 Buick and Pontiac models excluding ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Rebuilt Thermostatic Heater Valve for 1959-1961 Buick and Pontiac ...

Replacement Heater Valve for 1962-1963 Buick models with 6 Cylinder, with Thermostatic Valve, Requires Core For Core refund Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be acceped. Please Call or email about ...

Replacement Heater Valve for 1971-1980 GM models with 305/350 V8, with Factory A/C, Threaded w/ Slight Bend, Vacuum Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...

Replacement Heater Valve for 1967-1968 Lincoln models with 462 CI V8 , with Factory A/C, Vacuum Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...

Replacement Expansion Valve for 1974-1983 Chrysler, Dodge, and Plymouth models with Factory A/C, Block Style Valve Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in the ...

A/C Hose Assembly for 1976-1980 Chevrolet and GMC Trucks with Big Block V8, Dual Hose w/ Muffler Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a ...

Replacement Heater Valve for 1974-1975 Buick models with V8, Original Metal Style with Offset Fittings, Vacuum Operated Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...

Replacement O-Ring Kit w/ assembly lube for GM Application A/C Systems Made in the ...

...

Replacement Vacuum Switch for Heater Valve for 1963-1967 Chevrolet Corvette models, Replaces Original Brass Switch Replaces GM# 3839651 & 3859356 Made in the ...

Replacement Heater Valve for 1969-1978 GM models with Factory A/C, Normally Open with Bracket, Vacuum Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in ...

Replacement Heater Valve for 1974-1979 GM applications, Straight, Vacuum, Normally Open, Vacuum Operated, 5/8" Hose Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...

Replacement Heater Valve for 1951-1953 Buick models with Thermostatic Valve, Requires Core Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your ...

Replacement Heater Valve for 1950-1954 Chrysler models with Thermostatic Valve, Requires Core with heater models: 103, 104, 500-506, or 550 Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other ...

Heater Valve Rebuilding Service for 1954-1955 Buick Full Size models with Thermostatic Valve. THIS IS A REBUILD SERVICE FOR YOUR ORIGINAL HEATER VALVE! - Core supplied must be a Ranco or Harrison Thermostatic Heater Valve in rebuildable condition. NOTE: Everhot ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. There is also a refundable core charge of $125.00 added to price, Once ...

Replacement Heater Valve for 1961-1962 Chevrolet and GMC Trucks with Thermostatic Valve, has Cable on Tube Side, Requires Core For Core refund.  The core charge is $120.00 and will be added to price of part and once core received we will refund if core is good.  ...

Replacement Heater Valve for 1958-1964 Oldsmobile models, Threaded, Vacuum Operated Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. Made in the ...

Replacement Heater Valve for 1958 Pontiac Full Size models with Thermostatic Valve, Requires Core For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or email about ...

Replacement Heater Valve for 1959-1962 AMC models with Thermostatic Valve, Requires Core Replaces # 3437604 and 3455545 For Core refund. Only valves with copper heater fittings are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or email ...

Replacement Heater Valve for 1960-1964 Chrysler and Dodge models with Thermostatic Valve, Requires Core For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. $125.00 REFUNDABLE CORE ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Replacement Heater Valve for 1964-1966 Dodge models with Non Air ...

Replacement Heater Valve for 1968-1969 Dodge models with Factory A/C, with Thermostatic Valve, Core may be Required.  Must be Ranco or Harrison if rebuild original. Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Replacement Heater Valve for 1966-1970 AMC models with  ...

Replacement Heater Valve for 1965-1969 Chrysler and Dodge models with Factory A/C, with Thermostatic Valve, Requires Core.  $150.00 Refundable Core Charge included in price once received and inspected. For Core refund. Only valves with copper heater fittings are acceptable. ...

Replacement Heater Valve for 1966-1967 Dodge models with Factory A/C, Rebuilt Thermostatic Valve, Requires Core For Core refund. Only valves with copper heater fittings are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or email about ...

Replacement Expansion Valve for 1977-1980 Ford and Lincoln models, Silver, Block Style Valve Use 2.5" Long POA Valve #25-8847 Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...

Replacement Expansion Valve for 1977-1980 Ford and Lincoln models, Gold, Block Style Valve Use 2.5" Long POA Valve #25-8847 Our valves offer the quality, reliability and durability of OE. Restore A/C performance due to restricted or failing components. ...

Plastic Universal Use Control Knob, 1-1/8" Round, Ribbed Plastic, w/ Tapped #10-32 Insert Made in the ...

Plastic Universal Use Control Knob, 1" Round, Ribbed Plastic, w/ Tapped #10-32 Insert Made in the ...

Brushed Aluminum Vent Housing, for Round Vents Made in the ...

Brushed Aluminum Underdash Center Vent Housing Fits Louvers #32-13 & 32-41 Made in the ...

Brushed Aluminum Corner Vent Housing, for Elite Series Vents Made in the ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild and there will be a additional $125.00 added to the price to be refunded ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Replacement Heater Valve for 1957 Buick Full Size models ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Replacement Heater Valve for 1958 Buick Full Size models ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Replacement Heater Valve for 1953-1954 Chevrolet Full Size  ...

Replacement Heater Valve for 1955-1959 Chevrolet models with Thermostatic Valve, Requires Core For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or email about ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Replacement Heater Valve for 1955-1956 Chevrolet Full Size  ...

Replacement Heater Valve for 1957 Chevrolet Full Size models with Thermostatic Valve, Requires Core For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call or ...

Replacement Heater Valve for 1959 Chevrolet models with Thermostatic Valve, with 3/4" Heater Hose, Requires Core For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Please Call ...

Please Call or email about availability before ordering. Our current stock is dependant on rebuildable cores being returned by other customers. If no cores have been returned we may require your original core to rebuild. Replacement Heater Valve for 1958 Chevrolet Full Size models ...

Replacement Heater Valve for 1947-1955 Chevrolet and GMC Trucks with Thermostatic Valve, Requires Core For Core refund. Only valves with copper heater fittings (Ranco or Harrison) are acceptable. Valves with steel heater fittings (EverHot) will not be accepted. Our valves offer ...