Electric Fan and Shroud Assembly, 2010 CFM, 225w Motor, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 17" x 16-1/2" x 3-3/8" Made in the ...

Electric Fan & Shroud Assembly w/ Wire Harness, Relay & Adj. Thermostat, 2010 CFM, 225w Motor Measure vehicle to verify fit & clearance Dimensions: 17" x 16-1/2" x 3-3/8" Made in the ...

Our Dual Fan & Shroud Assembly, Specifically Designed for 1967-1972 Chevrolet & GMC Trucks This kit includes a Fan Shroud & Dual fans with optional Relay Protected, Heavy Duty Wire Harness & your choice of a ...

Remanufactured VIR Assembly. NOTE: We are no longer accepting VIR cores ...

SuperKool Remote Parallel Flow Aluminum Condenser with Shroud and 11" Electric Fan Dimensions:  12" tall x 23" wide x 4" overall (Including fan & Shroud) Note: Remote condenser assembly is not designed for use in front of the radiator. Excellent for vehicles with litt

Our factory style Deluxe Lever Control Assembly for 1964-1966 Chevrolet & GMC Trucks. This assembly is a direct replacement for the Deluxe Heater Controls with bezel, controls, cables, and all necessary hardware. Restore your controls back to proper working condition! Made in the

Dual Electric Radiator Fan Assembly for 1975-86 Jeep CJ 2760CFM, Dual 225 Watt Motors @22 Amps Dual Electric Fan Assembly designed for 1975-86 Jeep CJ series vehicle with 24" wide radiator. Includes brackets to mount radiator core support using stock radiator mounting locations. Available ...

Custom Condenser Assembly designed for 1966-67 Chevrolet Chevelle and El Camino models Custom Condenser Assembly includes SuperKool Condenser, Custom Alumiunm Tubes, Receiver Drier, Mounting Brackets and necessary hardware.   SuperKool Condensers are one of the highest ...

Custom SuperKool Condenser Assembly for 1981-87 Chevrolet and GMC Trucks with Compressor on Passenger Side Note : These Condensers can be used with the original factory a/c system components but will require custom a/c hose assemblies to complete the installation. These ...

Factory Replacement A/C Muffler/Manifold Assembly for 1965-1972 Pontiac Full Size and Lemans models This A/C Muffler/Manifold Assembly fits the Factory A6 or the Pro6TEN compressor. #12 Push on barbed fitting for suction hose and #8 Male Insert fitting for discharge hose. Made in the ...

Dual Fan & Shroud Assembly, w/ Wire Harness, Relay & Adj. Thermostat, w/ 225w Motors, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 15-3/4" x 23-1/2" x 3-7/8" Made in the ...

Dual Fan & Shroud Assembly, w/ Side Mounting, w/ 225w Motors, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 15-3/4" x 26-1/2" x 3-7/8" Made in the ...

Dual Fan & Shroud Assembly, w/ Top Mounting, w/ 225w Motors, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 18-3/4" x 23-1/2" x 3-7/8" Made in the ...

Dual Fan & Shroud Assembly, w/ Sensor & Harness, w/ Top Mounting, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 18-3/4" x 23-1/2" x 3-7/8" Made in the ...

Dual Fan & Shroud Assembly w/ Dual 225 Watt Electric Motors, 3100 CFM, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 15-1/2" x 26-1/2" x 3-1/4" Made in the ...

Dual Fan & Shroud Assembly w/ Wire Harness and Adjustible Temperature Sensor. Features Dual 225 Watt Electric Motors, 3100 CFM, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 15-1/2" x 26-1/2" x 3-1/4" Made in the ...

Our Dual Fan assembly designed for 1967-1970 Mustang & Cougar models, w/ V8 and 24" Stock Radiator Core, or 24" Griffin Radiator Core Shrouded fan assemblies include custom mounting, wire harness and adjustable thermostat. High temperature resistant plastic with high performance electric

Our Fan and Shroud Assembly designed for 1967-1970 Mustang and Cougar models, w/ V8 and 20" Stock Radiator Core Shrouded fan assemblies include custom mounting, wire harness and adjustable thermostat. High temperature resistant plastic with high performance electric fans to deliver ...

Our Custom Fan & Shroud Assembly Designed for 1964-1966 Ford Mustang models with V8 engine, with Stock Radiator ...

Our Custom Fan & Shroud Assembly Designed for 1964-1966 Ford Mustang models with V8 engine, with Stock Radiator This Custom Fan Assembly with High-Temperature Resistant Plastic Shroud and 16" Electric Fan, includes custom ...

Our Custom Fan & Shroud Assembly Designed for 1964-1966 Ford Mustang models with V8 engine, with Griffin Radiator This Custom Fan Assembly with High-Temperature Resistant Plastic Shroud and 16" Electric Fan, includes custom ...

Old Air Products Heavy Duty Condenser Assembly for 1987-1995 Jeep YJ Wrangler models Heavy Duty Condenser Assembly bolts in as a direct replacement for the factory condenser. Includes custom aluminum tubes, brackets and mounting hardware. Made in the ...

Custom Condenser Assembly designed for 1969 Camaro/Firebird Custom Condenser Assembly for 1969 Chevrolet Camaro and Pontiac Firebird includes SuperKool Condenser, Custom Alumiunm Tubes,Receiver Drier, Mounting Brackets and necessary hardware. (Compatible with R12 or 134a ...

Custom Condenser Assembly designed for 1964-65 Chevrolet Chevelle and El Camino models Custom Condenser Assembly includes SuperKool Condenser, Custom Alumiunm Tubes, Receiver Drier, Mounting Brackets and necessary hardware. SuperKool Condensers are one of the highest performing and ...

Custom SuperKool Condenser and Electric Fan Assembly for 1947-55 Chevrolet Trucks, Passenger Side Compressor SuperKool aluminum condenser with 14" electric fan and mounting kit provides increased airflow across condenser and radiator for maximum cooling system performance. Condenser and ...

Custom SuperKool Condenser Assembly for 1981-87 Chevrolet and GMC Trucks with Compressor on Driver's side Note : These Condensers can be used with the original factory a/c system components but will require custom a/c hose assemblies to complete the installation. These ...

Condenser assembly for 1975-86 Jeep CJ. Works well as a factory replacement or with aftermarket ac systems. Note: Photo is for reference only, Condenser may be supplied with either black or unpainted raw metal finish.

A/C Hose Assembly for 1976-1980 Chevrolet and GMC Trucks with Big Block V8, with Rear A/C, Dual Hose with Muffler Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use ...

A/C Hose Assembly for 1971-72 Chevrolet Camaro with Big Block Engine Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a refrigerant. ...

A/C Hose Assembly for 1972 Chevrolet Nova applications, Dual Hose w/ Muffler Designed for models with V8 engine, and hose assembly NOT connected to the fender. Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose a

Suction-Discharge Hose Assembly 1974-76 Chevrolet Nova with Small Block V8 Old Air Products A/C Hose Assemblies are manufactured wth high quality barrier hose and beadlock ferrules and fittings. Our hose assemblies are designed for use with either R12 or 134a refrigerant. Made In ...

Dual Fan & Shroud Assembly w/ 225 Watt Electric Motors, 2760 CFM, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 15-3/4" x 23-1/2" x 3-7/8" Made in the ...

Dual Fan & Shroud Assembly, w/ Sensor & Harness, w/ Side Mounting, 12 Volt Measure vehicle to verify fit & clearance Dimensions: 15-3/4" x 26-1/2" x 3-7/8" Made in the ...

A/C Control Bezel and Louver Assembly for 1968 Ford Mustang Driver Side High quality reproduction of factory A/C control bezel/faceplate with louver. (Includes knobs) Features chrome housing and original style black camera case finish along with new knobs. (Note: Faceplate only, rear lever ...

A/C Control Bezel and Louver Assembly for 1967 Ford Mustang Driver Side High quality reproduction of factory A/C control bezel/faceplate with louver. (Includes knobs) Features chrome housing and original style black camera case finish along with new knobs. (Note: Faceplate only, rear lever ...

Custom Condenser Assembly designed for 1969 Chevrolet Camaros with Driver Side Mounted Compressor SuperKool Custom Condenser Assembly engineered specifically for 1969 Chevrolet Camaros with a Driver Side mounted Compressor. The assembly includes a high-efficiency SuperKool condenser, custom-forme

Custom Condenser Assembly designed for 1969 Chevrolet Camaros with Passenger Side Mounted Compressor SuperKool Custom Condenser Assembly engineered specifically for 1969 Chevrolet Camaros with a Passenger Side mounted Compressor. The assembly includes a high-efficiency SuperKool condenser, custom

Custom SuperKool Condenser and Electric Fan Assembly for 1947-55 Chevrolet Trucks, Driver Side Compressor SuperKool aluminum condenser with 14" electric fan and mounting kit provides increased airflow across condenser and radiator for maximum cooling system performance. Condenser and ...