March Performance Chevrolet LS Wide Bracket Kit without Power Steering March Performance's new All Billet Aluminum Style Strack serpentine system is created with a combination of style and low price that is sure to find favor among car enthusiasts everywhere. The highly styled one piece ...

March Performance "Style Track" Bracket Kit for Chevrolet LS Engines Desigend for models with Electronic Throttle Body and Power Steering. Requires Remote Power Steering Resevoir #42-00450. Requires additional Balancer Hub Adapter for mounting crank pulley. WILL NOT WORK WITH VARIABLE VALVE ...

March Performance Chevrolet LS Narrow Bracket Kit without Power Steering March Performance's new All Billet Aluminum Style Strack serpentine system is created with a combination of style and low price that is sure to find favor among car enthusiasts everywhere. The highly styled one piece ...

March Performance Chevrolet LS Narrow Bracket Kit with Power Steering March Performance's new All Billet Aluminum Style Strack serpentine system is created with a combination of style and low price that is sure to find favor among car enthusiasts everywhere. The highly styled one piece ...

Universal Fit Tube and Bracket Kit for Condenser and Drier Neatly Attaches Drier to Passenger Side of Condenser Made in the ...

Replacement Tube Bracket for 1969-1970 Ford Mustang models, at ...

Universal Use, 90 Degree Underdash Cable Bracket Dimensions: 1" wide x 1-1/8" tall x 1-1/8" ...

Compressor mount designed for 1975-1978 Ford 351M & 400 V8 Engines, Standard or Power Steering, w/ or w/o Smog Pump, Drivers Side Mount for a Sanden 508 or equivalent compressor. Requires waterpump with driver side outlet & 4 bolt harmonic balancer. Includes bracket, id

Compressor mount designed for 1974-80 Ford 460V8 Engines, Standard or Power Steering, w/ or w/o Smog Pump, Drivers Side Mount for a Sanden 508 or equivalent compressor. Requires waterpump with driver side outlet & 4 bolt harmonic balancer. Includes bracket, crankshaft pulley, id

Compressor mount designed for 1968-72 Ford 351C (Cleveland) Engines, Standard or Power Steering, w/ or w/o Smog Pump, Drivers Side Mount for a Sanden 508 or equivalent compressor. Requires waterpump with driver side outlet & 4 bolt harmonic balancer. Includes bracket, crankshaft

Replacement Receiver Drier Mounting Strap Bracket, in Black Finish 2-1/2" ID and can be used with our driers #21-321 and ...

Aluminum Condenser Bracket Set for Superflow Condensers. Pre formed aluminum brackets with threaded inserts for mounting screws. Designed to be bent and trimmed as needed to make custom condenser brackets for your vehicle. Works with all of our Superflow Series aluminum condensers. Fits Old Air

Replacement Receiver Drier Mounting Strap Bracket, in Plain ...

Compressor Bracket for LS Series Engines. Mounts compressor on passenger side of engine. Recomended using with Compressor #21-4665 or #21-4665P  (Sanden 709 or ...

Compressor Bracket for Buick Nail Head 401/425 Engines. (Will Not Fit 364). Top Mount bracket works with rotary compressor Part number 21-4510 (Sanden 508, 7H15 or equivilent)

Compressor and Alternator Bracket - 1963-66 Buick Riviera 401/425 Bracket mounts Alternator and Rotary compressor #21-4510 (Sanden 508 or 7H15 or equivilent) on the passenger side of engine. ...

Compressor Bracket Kit for Ford 1970-78 302 and 351 Engines Fits 1970-78 302 and 351 Engines This bracket kit can be used with or without the power steering bracket. Designed for use a 2-groove water pump pulley #18-0302-2WPA and a 3-groove crankshaft pulley #18-03

Compressor / Alternator Mounting Bracket for 1955-57 Ford Thunderbird Bracket assembly mounts a #21-7170 compressor (B7170 or equivilent) and small case Ford alternator on the passenger side of the 1955-57 Ford Thunderbird with "Y" block engine. ...

Compressor Bracket Kit for Ford FE Engines Fits 332, 352, 360, 390, 406, 427 & 428 Cubic Inches This bracket kit can be used with or without the power steering bracket. Designed for use a 2-groove water pump pulley #C8AE-8509-B and a 3-groove crankshaft pulley #D3TE-6312-AB. Not

Replacement Hold Down Bracket for #12 Hose for 1969-1972 Chevrolet Chevelle, El Camino models, mounts at ...

Replacement Receiver Drier Mounting Strap Bracket, in Chrome ...

Replacement Heater Valve Bracket for 1967-1968 Ford Mustang and Mercury Cougar models, Exact Reproduction for ...

Replacement Bracket for 1967-1972 Chevrolet and GMC Trucks, Tube to Battery Tray ...

Replacement GM Receiver Drier Bracket, 3 Inch, Requires 2, Sold ...

Mounting bracket to mount factory AC Control to dash on 1967-72 Chevrolet and GMC Trucks.

Built for Chevy LT-1 motors. This serpentine kit offers an exciting new look when mounting an accessory drive in your muscle car or street rod. Compact design and extremely adaptable with options for everything from alternator only to alternator, A/C, and Remote Power Steering. Two separate ...

Condenser Mounting Brackets for 1973-82 Corvette Set includes 1 pair of mounting brackets and necessary screws to attach brackets to condenser. Designed for use with Old Air Products Condenser #11-31930

Our Bracket Kit designed to mount a factory style Drier on 1964-1966 Ford Mustang models. Hardware included.   Made in the ...

Electric Fan Mounting Bracket Set This bracket set is designed to mount a 14" Spal Electric fan on our 11-1817 condenser and/or 51-4001PS Condenser Assembly for 1947-55 Chevrolet & GMC Trucks. Bracket set includes brackets and hardware. (Electric Fan & Condenser

LS Engines - Low ...

Low Mount Compressor Bracket for Chevrolet Small Block V-8 w/ Short Waterpump Designed for tight fit in vehicles with narrow frame. Requires electric fuel pump Recommend using with Old Air Products compressor #21-451 or #21-4663  (Sanden 508 or ...

Low mount mini A/C bracket for Corvette LS and supercharged LSA engines using #21-7176 Compressor (Sanden SD7B10 - 7176 or equivilent). Only works with Caorvette or similer belt spacing such as LSA. Does not work with Holley Gen 1 or Gen 2 Camaro engine mounts. Includes: Brackets, Tensioner

This bracket mounts the Sanden mini compressor “High and Tight” on LS engines with Truck/SUV (1999-2013) and Camaro (2010-15) crank pulley / water pump spacing. The 40-10700 is a narrow AC bracket that mounts 40-7176 compressor (AKA - “mini” Sanden SD7B10, 7176 Series) in front of the pas

Power Steering and Alternator bracket for 1964-68 Chevelle with Big Block engine with short water pump. This wide mount low profile alternator bracket provides clearance for low hood and additional clearance for power steering pump andframe rail. Brackets mount to top waterpump bolt, two bots

Compressor Bracket Kit for Early Ford 1969 351W Engines Fits Early 1969 Ford 351w Engines with passenger side waterpump inlet This bracket kit can be used with or without the power steering bracket. For use with Old Air Products compressor #21-4510, 21-4510P (Polished), 21-4510

Compressor Bracket Kit for Ford 1979-84 302W and 351W Engines Fits 1979-84 302 Windsor and 351 Windsor Engines This bracket kit can be used with or without the power steering bracket. Designed for use a 2-groove water pump pulley #18-0302-2WPA and a 3-groove crankshaft

Replacement 1967 Chevrolet Corvette, A/C Duct to Steering Column ...

Replacement Hold Down Bracket for #12 Hose for 1968 Chevrolet Corvette models, mounts at ...

Bracket mounts Driver side air duct to kick panel on 1963-67 Corvette equipped with factory air conditioning. ...

Replacement Bracket for 1963-1966 Chevrolet Corvette, A/C Duct to Steering Column ...

Our factory style replacement bracket for OE Steamboat/Master Switch on 1965-1976 Cadillac models. Made in the USA!

Ccompressor Mount & Drive Kit for Mopar, Chrysler and Dodge 400 & 440 V8 Engines. Mounts Old Air Products #21-4510 (Sanden 508 style or equivilent) Compressor. Works on engine equipped with standard or power steering and with or without smog pump. Kit includes Mounting Bracket, ...

York to Sanden Adapter Bracket Adapts Sanden 508 style compressor to an original York mounting bracket. Use with original bracket, idlers and belt tensioner. Also commonly used to fabricate custom brackets. Kit includes hardware to mount Sanden style compressor or equivilent. Made in the U

Old Air Products Universal Bracket Spacer Kit Includes a variety of spacers commonly used with universal mounting plates #40-609 to fabricate custom mounting brackets. Made in the USA!